Butlerib® II Wall System ─ Offers Unlimited Design Freedom
The Butlerib® II wall system creates the look and performance desired with outstanding affordability. It offers unlimited design freedom and is the fundamental Butler wall panel system. It can be incorporated with other materials such as brick, EIFS, and other Butler metal wall systems.
Features and Benefits
Corrugation: 1½" corrugation provides extra strength
Fasteners: a variety of fastener options to meet your aesthetic and security needs
Punching: optional factory-punched panels and structural members ensure proper fit and alignment
Finishing options: superior-performance Butler-Cote™ finish system (Kynar 500® or Hylar 5000®) adds beauty and protection
Available gauges: 24- or 26-gauge
Insulation accommodation: Can accommodate up to 4" of insulation
Panel dimensions: Panels are 36" in width and up to 40' in length
Shadowall™ Wall System
The Shadowall™ wall system combines an architecturally pleasing appearance with exceptional energy efficiency. No additional framing is needed to support its installation, and the panels require as much as 33 percent fewer fasteners for lower installation cost and reduced heat loss.
Features and Benefits
Surface options: fluted and Fine line
Corrugation: Deep 17/16 corrugations provide strength to resist billowing when fasteners are installed
Fasteners: recessed fasteners give walls an attractive and uniform appearance with smooth, clean lines
Punching: optional factory-punched panels and structural members ensure proper fit and alignment
Finishing options: superior-performance Butler-Cote™ finish system (Kynar 500® or Hylar 5000®) adds beauty and protection
Insulation accommodation: up to 6" of blanket insulation
Panel dimensions: panels are 36" in width and up to 40' in length
Options: thermal break window frame available in a variety of sizes and colors
Butler Thermawall™ Fluted, Fineline, and Flat Wall Systems
The Butler Thermawall™ wall system creates a uniform, attractive appearance. These factory-insulation wall panels come with concealed fasteners with R-values ranging from R-16 to R-32. Its attractive interior metal panel provides a finished look without the need for additional materials.
Features and Benefits
Surface options: fluted, Fineline, and flat
Fasteners: hidden
Finishing options: superior-performance Butler-Cote™ finish system (Kynar 500® or Hylar 5000®) adds beauty and protection
Insulation accommodation: factory-installed rigid insulation board for enhanced energy efficiency in 2, 2½, 3, and 4-inch thicknesses
Panel dimensions: fluted and Fineline panels are 42" wide; flat panels are 36" wide
eShadowall™ Wall System
The eShadowall™ wall system adds life cycle cost savings to building projects where energy efficiency is a chief concern. Energy efficiency is gained through its unique assembly design, combining thermal spacer blocks and fiberglass blanket insulation. It requires as much as 33 percent fewer fasteners than most insulated metal wall panels, reducing costs and preventing heat loss.
Features and Benefits
Corrugation: deep 1-7/16" corrugations provide strength to resist billowing when fasteners are installed
Fasteners: semi-concealed fasteners to enhance the appearance
Punching: exclusive factory-punched panels allow for speedy installation and ensure long-term building performance
Finishing options: superior-performance Butler-Cote™ finish system (Kynar 500® or Hylar 5000®) adds beauty and protection
Available gauge: 26-gauge panels
Insulation accommodation: marries thermal spacer blocks, fiberglass blanket insulation, and a vapor barrier to fulfill the International Energy Conservation Code and ASHRAE Standard 90.1 (the foundation of many code requirements in the US.)
Panel dimensions: panels are 36" in width and up to 40' in length
eStylWall™ II Flat Wall System
The eStylWall® II flat wall system combines architectural appeal with energy efficiency. It is a factory-insulated flat wall system with a smooth monolithic appearance. It features a patented design pairing thermal spacer blocks and fiberglass insulation with a vapor barrier that can achieve R-values up to R-26.3.
Features and Benefits
Corrugation: N/A; features an embossed stucco pattern and consistent texture
Fasteners: hidden fasteners
Finishing options: superior-performance Butler-Cote™ finish system (Kynar 500® or Hylar 5000®) adds beauty and protection, available in several visually appealing colors
Insulation accommodation: patented design pairing thermal spacer blocks and fiberglass insulation with a vapor barrier
Panel dimensions: 16" panel width
eStylWall™ II Fluted Wall System
The eStylWall™ II fluted wall system creates a visually striking exterior while enhancing the energy efficiency of a building's interior. It features a patented design pairing thermal spacer blocks and fiberglass insulation with a vapor barrier that can achieve R-values up to R-19.6.
Features and Benefits
Corrugation: deep-ribbed design creates unique shadows
Fasteners: hidden fasteners
Finishing options: superior-performance Butler-Cote™ finish system (Kynar 500® or Hylar 5000®) adds beauty and protection. Available in a range of cool colors that carry a solar reflectance index up to 91.
Insulation accommodation: patented design pairing thermal spacer blocks and fiberglass insulation with a vapor barrier
StylWall® II Flat Wall System
The StylWall® II flat wall system creates a smooth, clean appearance outside while enhancing energy efficiency inside. It is a factory-insulated flat wall system with a smooth, monolithic appearance. It can be combined with other Butler® wall systems or brick, glass, and other conventional materials.
The interlocking joint design allows panels to easily "lock" into place for faster installation and allow for almost any conventional finish on the interior of the wall system.
Features and Benefits
Corrugation: N/A; features an embossed stucco pattern and consistent texture
Fasteners: hidden fasteners
Finishing options: superior-performance Butler-Cote™ finish system (Kynar 500® or Hylar 5000®) adds beauty and protection, available in several visually appealing colors
Available gauge: 26
Insulation accommodation: factory-installed rigid insulation board for enhanced energy efficiency
Panel dimensions: 16" panel width
StylWall™ II Fluted Wall System
The StylWall™ II fluted wall system creates striking visual effects to distinguish a building's exterior. It can be combined with other Butler® wall systems or brick, glass, and other conventional materials.
Its interlocking joint design allows panels to easily "lock" into place for faster installation and allow for almost any conventional finish on the interior of the wall system.
Features and Benefits
Corrugation: attractive broad-ribbed design and embossed pattern produces interesting shadows and consistent texture
Fasteners: hidden fasteners
Finishing options: superior-performance Butler-Cote™ finish system (Kynar 500 or Hylar 5000) adds beauty and protection
Available gauge: 26
Insulation accommodation: can be easily insulated with a wide variety of insulation systems — batt, blanket or rigid board
Panel dimensions: 16" panel width
TextureWall™ Panel Wall System
The TextureWall™ panel wall system adds a classic stucco appearance with lasting durability. It is a factory-insulated metal wall system with interlocking panels that resist the effects of impact, abrasion, and weather. The interior panel face is finished in a Fineline configuration with a white polyester color that can stand alone or be used to apply other conventional wall materials.
Features and Benefits
Fasteners: hidden
Finishing options: Texture-Cote™ finish system — a hard, aggregated, fiber-reinforced polymer finish in four colors with a 10-year warranty
Insulation accommodation: factory-insulated panels available in 2- to 4-inch thicknesses
Panel dimensions: 42" panel width
Tilt-Up/Hardwall
Don't see the exact Butler wall system you are looking for? No problem. Beyond our standard product offering, all Butler Buildings can receive alternative exterior wall integration such as stucco, tilt-up, stone, etc.… Use our system to save money and gain the look you desire with clear spans and MR-24 roof advantages. Fire ratings can also be met by integrating approved ICBO assemblies for 1 and 2-hour ratings if required. Maximum flexibility is available for all.
Wall Color Charts
KYNAR 500 AND HYLAR 5000 FINISHES
All panels are available in a variety of contemporary and cool solar colors; this painting system has set performance requirements for coatings thru-out the industry and is used for all standard exterior Butler painted roof panels, wall panels, and trim.
Features and Benefits
A 25-year warranty protects against blistering, peeling, cracking, and chipping of the paint. We always look good.
Butler uses the Butler-Cote premium high reflectivity factory applied finish system on all exterior painted products.
Wall Colors Chart